通过电子 定时器定时 到1s给一个中断 让单片机去执行中断 跳转至相应的数码管位 然后修改当前显示值 再设置到10进位加一 之后就出来数字时钟的效果
Through the electronic timer 1s to a microcontroller to the interrupt interrupt to jump to the corresponding bit digital tube and then modify the current display value is set to 10 and then carry out the effect of digital clock (2017-05-01, Visual C++, 17KB, 下载1次)
用小开关用于模拟代替扫描开关，当有产品经过时，会使开关送出低电平，每按一下便会使数码管上的计数器加一，实现模拟工厂里的产品扫描计数器的功能。
With a small switch is used in place of the analog scanner, when the product passes, the switch will send a low level, each click will make the digital counter is incremented by one, analog products factory scan counters. (2016-04-21, Visual C++, 1KB, 下载1次)
PLC大营脚隧道控制软件，开发工具菲尼克斯PC WORX软件，实现隧道内车道指示器、CO/VI,风速风向，风机，灯具，消防泵等等动作，每个PLC控制的东西不尽相同，本文件是主控PLC程序
zhukong plc 程序 (2016-03-08, Visual C++, 1734KB, 下载2次)
使用stc公司的IAP15W系列单片机作为主控制器，使用mpu6050的陀螺仪，加速度计，二阶微分滤波，速度反馈，PID的速度控制算法。宏晶杯大赛作品
Use stc s IAP15W series microcontroller as the main controller, use mpu6050 gyroscopes, accelerometers, second-order differential filtering, speed feedback, PID speed control algorithms. Wang Jing Cup Contest (2016-01-06, Visual C++, 181KB, 下载9次)
[现代控制工程].(Modern.Control.Engineering,.5ed).,Katsuhiko.Ogata,.文字版
本书详尽地论述了连续控制系统的分析和研究方法，包括常用时间函数的拉普拉斯变换和基本的拉普拉斯变换定理，动态系统的数学模型，一阶和二阶系统的瞬态响应分析，工业自动控制器（如气动、液压、电子控制器）的基本控制作用，根轨迹分析，控制系统的频率响应分析，基本的和变形的PID控制，应用频率响应法进行设计和补偿的技术，控制系统的状态空间分析及可控性和可观测性，控制系统的状态空间分析法。
(Modern.Control.Engineering,.5ed).,Katsuhiko.Ogata,.Book of continuous control system are discussed in detail analysis and the research methods, including common time function of Laplace transformation and the basic theorem of Laplace transform, the mathematical model of dynamic system, the transient response of the first-order and second-order system analysis, industrial automatic controller (such as pneumatic, hydraulic, electronic controller), the basic control function root locus analysis, frequency response analysis of the control system, the basic and the deformation of PID control, the frequency response method to carry on the design and compensation technology, the control system of the state space analysis and the controllability and observability, the control system of the state space analysis. (2015-06-12, Visual C++, 4717KB, 下载8次)
单片机 ： AT89S52 或 STC89C52RC
功能 ：串口发送温湿度数据 波特率 9600
硬件连接： P2.0口为通讯口连接DHT11,DHT11的电源和地连接单片机的电源和地，单片机串口加MAX232连接电脑
MCU: AT89S52 or STC89C52RC
Function: temperature and humidity data serial port baud rate 9600
Hardware connection: P2.0 port as communication port DHT11, DHT11 power and ground connection of the supply and ground, single-chip serial plus MAX232 connected to the computer (2015-05-20, Visual C++, 2KB, 下载2次)
商城后记得瑟方便快捷和设备看接撒的可i客户深刻镂空设计和短裤看斯达康符合萨克会计师大部分空间撒饿uuhsdf立刻ug
If you let him better than any of the three recognized purchasing fee sprinkle pink pink dry mall site was Joseph happiness ughfeskjfg Starcom almost crazy Joseph u (2014-06-09, Visual C++, 3096KB, 下载3次)
基于ARM的俄罗斯方块设计，本次将设计实现一个用C语言编写的、在基于ARM核心的ADuC7020 ARM开发板上实现的单机版的俄罗斯方块小游戏。使用Keil3编程软件对C语言代码进行编写，支持按键操作，在实现过程中涉及了LCD液晶屏的图形显示、按键控制、LED控制、中断、蜂鸣器等嵌入式的编程技术。
Tetris ARM-based design, this will be designed to achieve a C language, the ADuC7020 ARM development board ARM core-based implementations of stand-alone version of the Tetris game. Use Keil3 programming software code written in the C language, support for key operations involved in the implementation process of the LCD screen graphical display, control buttons, LED control, interrupt, buzzer embedded programming techniques. (2014-01-10, Visual C++, 145KB, 下载9次)
程序名 ：温度控制器程序
编写人 ：zying 日 期 * 2012-1-24 HY-536开发板调试成功
带上限、下限控制，闪烁调整数字，调整范围0-99度。
温度低于设定下限启动到达上限停止,加、减按键兼开关。
利用DS18B20内部E2ROM保存上下限值。
程序名 ：温度控制器程序
Cheng Xuming: temperature controller program
编写人 ：zying 日 期* 2012-1-24 HY-536开发板调试成功
Written by:zying date* 2012-1-24 HY-536 development board debugging success
带上限、下限控制，闪烁调整数字，调整范围0-99度。
With upper bound, lower control, flashing digital adjustment, the adjustment range of 0-99 degrees.
温度低于设定下限启动到达上限停止,加、减按键兼开关。
The temperature is lower than the set limit to start at the limit stop, plus, minus buttons and switches.
利用DS18B20内部E2ROM保存上下限值。
Using DS18B20 internal E2ROM storage limit.
(2013-10-27, Visual C++, 36KB, 下载3次)
一个C语言编写的C语言解释器，可解释运行单片机code段内的C语言程序，类似于脚本解释器。支持变量定义、一维数组、指针、带参数的函数定义。
A C language written in C language interpreter, explains operating microcomputer code segment of C language program, similar to the script interpreter. Support variable definitions, a one-dimensional array, pointer, function definitions with a parameter.
(2013-05-16, Visual C++, 101KB, 下载6次)
用C语言编写一个功能丰富的定时器，可以设定起止时间及设置了暂停键和继续键，另外还增设了加计数定时和减计数定时
C language prepared by a feature-rich timer, you can set the start and end time and set the pause button and continue key, in addition to the creation of the timing of counting up and down counting timing (2013-05-05, Visual C++, 26KB, 下载17次)
将日期、时钟、秒表及闹钟功能分开实现。选择日期模式，则只显示年、月、日。选择时钟模式，则只显示时、分、秒。选择秒表模式，则只显示秒、毫秒。选择闹钟模式，显示为时、分、秒，另外加一个闹铃。
The date, clock, stopwatch and alarm functions to achieve separation. Select a date mode, only displays year, month, day. Select the clock mode, only displays hours, minutes, seconds. Select the stopwatch mode, only the display seconds and milliseconds. Select an alarm mode, display hour, minute, seconds, plus one extra alarm. (2011-12-27, Visual C++, 168KB, 下载4次)
本设计主要实现用按键控制步进电机四相单拍、四相双拍和四相八拍三种方式切换，
正、反转及其加、减速，并能在LCD上显示其运行状态（速度和转向）。
The design of the main keys to achieve control of stepper motor with a single shot four-phase, four-phase two-and four-phase eight-shot shoot three ways to switch
Positive, reverse its acceleration, deceleration, and in its operational status on the LCD display (speed and steering). (2011-12-02, Visual C++, 77KB, 下载16次)
单片机PROTEUS仿真实例，（行列键盘、DS1302时钟、7221动态显示、ram扩展、串口、播放音乐、汉字点阵、俄罗斯方块、流水灯、走马灯等）
SCM PROTEUS simulation instance, (the ranks of the keyboard, DS1302 clock, 7221 dynamic display, ram expansion, serial, music, character dot-matrix, Tetris, water lamp, lantern, etc.) (2011-07-06, Visual C++, 1494KB, 下载58次)
斯凯mrp开发用的宽字符转换 很有用的 有个头文string.c 和string.h 头文件里有定义
Sky mrp convert wide character to use for development of a useful article string.c head and string.h header files are defined (2011-04-07, Visual C++, 3KB, 下载13次)
普通定时器时钟
1、按键可以调整当时时间
2、按键可以调节定时时间
3、定时时间到继电器吸合
*8位数码管显示 时间格式格式 12-08-00 标示12点08分00秒
S1 用于小时 加1操作
S2 用于小时减1操作
S3 用于分钟 加1操作
S4 用于分钟减1操作
*/
/*-----------------------------------------------
名称：普通时钟
公司：上海浩豚电子科技有限公司
网站：www.doflye.cn
编写：师访
日期：2009.5
修改：无
内容：
Normal timer clock 1, key can adjust the time was 2 hours 3 buttons can be adjusted from time to time, regular time to relay pull-in* 8-bit digital tube display time format format 12-08-00 mark 12:08:00 S1 with the S2 in hours plus an operation by an operation S3 for hours for the minutes plus an operation by an operation S4 for the minutes*//*----------------------------------------------- Name: Common Clock Company: Shanghai Hao dolphin Electronic Technology Co., Ltd.: www.doflye.cn write: Division Visit Date: 2009.5 Review: No content: (2009-09-23, Visual C++, 14KB, 下载13次)
范围为0-9999的双向定时器，当我们要求系统为正定时器时，初始时间为00，即从00开始向上加计时，当加计时到设定值，正定时器停止工作，系统输出相应的控制信号，控制其他设备，当要求作为倒定时器使用时，初始时间为9999，即从9999开始向下减计时，当减到计时设定值时，倒定时器停止工作，系统输出相应的控制信号。
Two-way range of 0-9999 timer, when we ask the system timer is, the initial 00 hours, that is, upward increase from 00 the beginning of time, when the increase in time to set the value of the timer is to stop working, the system output the corresponding control signals to control other equipment, when the request timer was used as the initial time for 9999, down from 9999 by the beginning of time, when the reduced time settings, the timer would stop working, the system output the corresponding control signal. (2009-07-29, Visual C++, 2KB, 下载2次)
范围为0-99的双向定时器，当系统为正定时器时，初始时间为00，即从00开始向上加计时，当加计时到设定值，正定时器停止工作，系统输出相应的控制信号，控制其他设备，当要求作为倒定时器使用时，初始时间为99，即从99开始向下减计时，当减到计时设定值时，倒定时器停止工作，系统输出相应的控制信号。
Two-way range of 0-99 timer, the timer when the system is positive, the initial 00 hours, that is, upward increase from 00 the beginning of time, when the increase in time to set the value of the timer is to stop working, the system output corresponding control signals to control other equipment, when the request timer was used as the initial time to 99, down from 99 by the beginning of time, when the reduced time settings, the timer would stop working, the system output corresponding control signal. (2009-07-29, Visual C++, 2KB, 下载2次)
①把settle定义成char型变量
②settle=(settle>= A && settle <= B ) 写错了，改成(settle>= A && settle <= Z )
③scanf函数后面加一句getchar()用来吸收回车键
① put settle variables defined as char type ② settle = (settle> = ' A' & & settle < = ' B' ) was wrong, changed to (settle> = ' A' & & settle < = ' Z' ) ③ scanf function behind add a getchar () used to absorb the ENTER key (2009-03-15, Visual C++, 2KB, 下载2次)