通过28027EPWM模块生成PWM波,并通过CCS软件观察生成的波形
The PWM wave is generated through the 28027EPWM module, and the waveform generated is observed through CCS software. (2018-08-22, C/C++, 3330KB, 下载5次)
这个程序设置了EV定时器(Time1、Time2、Time3和Time4)。
产生T1PWM、T2PWM、T3PWM、T4PWM和PWM1-12波形。
然后用户可以使用范围来观察波形。
This program sets up the EV timers (TIMER1, TIMER2, TIMER3 and TIMER4) to generate T1PWM, T2PWM, T3PWM, T4PWM and PWM1-12 waveforms. The user can then observe the waveforms using an scope. (2018-06-27, C/C++, 84KB, 下载2次)
基于DSP28335产生pwm波形控制,应用于控制领域或者开关电源
PWM waveform control based on DSP28335 (2018-02-24, C/C++, 1KB, 下载10次)
DSP2812利用事件管理器产生两路互补的PWM波形驱动直流电机
DSP2812 using the event manager has two complementary PWM wave to drive DC motor (2015-04-20, DOS, 661KB, 下载2次)
使用 DSP 和 D/A 转换器可以产生连续的正弦波信号,同样也能产生方波、锯齿波、三角波等其它各种信号波形。本设计要求采用DSP及其D/A转换器产生上述各种信号波形。
Use DSP and D/A converter can produce a continuous sinusoidal signal, also can generate other various signal waveforms square wave, sawtooth, triangular wave. This design requires a DSP and D/A converter generates the above various signals waveforms. (2015-03-12, C/C++, 331KB, 下载4次)
该系统主要用于采用DSP长生PWM波形,共16路波形
The system is mainly used for data acquisition, DSP 2812 he was a high-precision processing system, worth a visit (2014-12-25, Objective-C, 143KB, 下载3次)
利用DSPTMS320F2812的事件管理器产生SPWM波形,应由于电力电子控制电路。
Use DSPTMS320F2812 event manager to generate SPWM waveform should be due to the power electronic control circuitry. (2014-12-04, C++ Builder, 213KB, 下载1次)
本源代码实现产生Pwm波形的功能,用来控制逆变器,控制方法简单,有电流闭环
Pwm waveforms generated source code function is used to control the inverter control method is simple, there are current loop (2014-05-19, Visual C++, 659KB, 下载16次)
基于TMS320F2812EVPWM波形设计源程序。
used CCS3.3 made EVPWM (2013-06-03, Others, 438KB, 下载1次)
F2812 ADC01 (CCS3.3开发环境下)软件置位启动AD转换,实现ADC模块16路通道的采样。序列发生器SEQ1和SEQ2级联成一个16通道的序列发生器,采样模式采用顺序采样。
F2812 ADC01 software is set to start AD conversion, the ADC module 16-channel sampling. Sequencer SEQ1 and SEQ2 cascade into a 16-channel sequencer, sampling mode using sequential sampling. (2011-12-18, C/C++, 321KB, 下载5次)
基于DSP2812产生PWM波形用来控制电机的转速
PWM waveform generation based on DSP2812 used to control the motor speed (2011-10-17, Visual C++, 221KB, 下载32次)
用DSP实现正弦波发生器,很好,很适合初学者学习。
Achieved with the DSP sine wave generator, very good, very suitable for beginners to learn. (2011-03-24, C/C++, 1526KB, 下载6次)
在DSP中 通过编程产生一SPWM波形
可以得到正弦调制的逆变器输出
By programming the DSP generates a SPWM waveform
Sinusoidal modulation of the inverter can be output (2011-03-18, C++, 57KB, 下载12次)
FIR滤波器在DSP TMS320C5402上的实现(C语言和汇编语言实现)
FIR filter in the DSP TMS320C5402 implementation (C and assembly language implementation) (2009-10-25, Asm, 60KB, 下载72次)
汇编语言实现波形延迟播放,可用于DSP设计时的CCS实现
Assembly language to achieve waveform delayed broadcast can be used for DSP design to achieve the CCS (2008-06-22, Asm, 2KB, 下载4次)
此源码为用于电力电子变换器的DSP汇编源程序,可以用来控制逆变器产品电压凹陷波形。
This source for power electronic converters for DSP compilation of source code that can be used to control inverter voltage sag waveform Products. (2008-06-07, C/C++, 89KB, 下载23次)
DSP正弦波发生器,基于DSP 5402。
DSP sine wave generator, based on the DSP 5402. (2007-08-04, Others, 41KB, 下载214次)
DSP中利用ccs5000编程
包括sinx计算FIR滤波正弦波发生器等
DSP programming including the use of ccs5000 sinx calculated FIR filter sine wave generator, etc. (2007-03-31, Others, 4KB, 下载29次)
在信号处理中,通常需要把采集信号的实时波形显示出来。 如果直接在屏幕上动态绘图的话,会出现闪烁现象,为了克服这个问题,本文采用的就是先在内存绘图,然后再拷贝到屏幕,从而实现动态绘图而不闪烁
in signal processing, usually need to collect real-time signal waveform displayed. If directly on the screen dynamic mapping, would arise scintillation phenomenon, in order to overcome this problem, This paper is the first in memory mapping, and then copied to the screen, thus achieving dynamic graphics without blinking (2007-01-06, Visual C++, 25KB, 下载154次)
DSP实现滤波器功能,输入100HZ,250HZ,270HZ波形,采样频率600HZ,滤出250HZ,270HZ
DSP filter function, input 518067, 250HZ, 270HZ waveform sampling frequency 600HZ, filtered 250HZ, 270HZ (2006-03-31, Asm, 5KB, 下载64次)