ccs中运行，可控制dsp出现pwm波形
load it in ccs v6, we could control dsp to generate pwm. (2017-11-17, C/C++, 687KB, 下载1次)
本实例是基于TMS320F28335的一些小程序，适合初学者，需要自行搭建最小系统，包括定时器、PWM波形建立等等。
This example is based on TMS320F28335 some small program for beginners, the minimum required to build their own system, including timers, PWM waveform establishing and the like. (2016-10-17, C++, 4479KB, 下载4次)
基于微处理器dsp28335为主芯片的的HRPWM程序开发利用程序，初学DSPspi开发例程学习产生高精度PWM波形教材使用
Based on microprocessor mainly dsp28335 chip HRPWM program development and utilization, beginners DSPspi development cases of high-precision PWM waveforms process learning materials to use (2016-08-16, C/C++, 461KB, 下载3次)
基于DSP的交错波形产生程序，第二路PWM波比第一路PWM波滞后180°相位。
interlace wave generate code (2015-08-12, C/C++, 275KB, 下载9次)
用2812实现三相SPWM驱动波形，所实现的SPWM波形载波频率为3kHz,载波比N=60，调制度为0.8，调试已通过可以使用。
By 2812 to achieve a three-phase SPWM driving waveforms implemented SPWM waveform carrier frequency of 3kHz, carrier ratio N = 60, modulation of 0.8, you can use the debugger has passed. (2014-05-02, C/C++, 217KB, 下载9次)
此代码实现的是使用tms320f2812的外部中断，对应ps2键盘扫描，当检验到键盘GPIO口电平发生变化时发生中断，开发环境为CCS。
This code is to use an external interrupt tms320f2812 corresponding ps2 keyboard scan Occurs when the keyboard GPIO port level changes to interrupt testing and development environment for CCS. (2013-12-23, C/C++, 442KB, 下载2次)
DSP28335的EPWM实例，使用EPWM1模块的中断，EPWM1A产生波形变化的矩形波，EPWM1B产生波形稳定的矩形波。EPWM2，EPWM3类似。
The DSP28335 EPWM instance, interrupt the use of the EPWM1 module, the rectangular wave EPWM1A waveform changes, EPWM1B generates a rectangular waveform stability. EPWM2, like EPWM3.
(2013-12-04, C/C++, 3KB, 下载27次)
pic 125K 开发例程 PWM波形产生
pic 125K develop routines PWM waveform generation (2013-07-17, C/C++, 69KB, 下载55次)
MCU的pwm波形输出可以实现led调光的智能驱动
Intelligent drive the MCU the pwm waveform output can be achieved led dimming (2012-10-26, Others, 11KB, 下载3次)
PWM波形产生的C程序，是2407的，完整的，很方便
C program generated by the PWM waveform is 2407, and complete, it is convenient (2012-06-07, Visual C++, 64KB, 下载3次)
利用DSP2812进行AD采样，并产生PWM波形，分析并比较
Use the DSP2812 AD sampling, and produce the PWM waveform, analysis and comparison
(2012-03-17, Visual C++, 5KB, 下载6次)
F2812 输出可调占空比的PWM波。 （CCS3.3开发环境下） 功 能：PWM1和PWM2输出频率为1KHz的PWM波形。波形的占空比每隔1s变化5 ,范围在10 到90 之间。 说 明：EVA下面的通用定时器T1工作于连续增/减计数模式，产生对称的PWM波形。通过T1的周期中断来计时，每隔1s钟改变1次占空比。死区时间为4.27us。
F2812 adjustable duty cycle of the PWM wave output. Function: PWM1 and PWM2 output frequency is 1KHz PWM waveform. Waveform s duty cycle changes every 1s 5 , range 10 to 90 . Description: EVA the following general-purpose timers T1 work in the continuous up/down counting mode, resulting in symmetric PWM waveform. Through the T1 cycle interrupt time, change every 1 minute duty cycle of 1s. Dead time of 4.27us. (2011-12-18, C/C++, 216KB, 下载13次)
AD采样频率为10K，序列发生器SEQ1和SEQ2级联成一个16通道的序列发生器，
* 采样模式采用顺序采样。利用通用定时器T1的周期中断来触发AD转换。
ADCINA0和ADCINB0为参考电平，对ADCINA0,ADCINA1，ADCINB0，ADCINB1连续10次采样，然后分别排序，滤波，取均值，用A0，B0的值计算增益和偏移量，用来校正A1，B1
AD sampling frequency of 10K, the sequence generator SEQ1 and SEQ2 cascaded into a 16-channel sequencer,* sampling mode with sequential sampling. The use of general-purpose timer interrupt to trigger the cycle T1 AD converter. ADCINA0 and ADCINB0 the reference level, the ADCINA0, ADCINA1, ADCINB0, ADCINB1 10 consecutive samples, then were sorting, filtering, taking the mean, with A0, B0 the value gain and offset used to correct the A1, B1 (2011-09-02, C++ Builder, 299KB, 下载10次)
数字信号处理程序，实现滤波器，时域频域信号的发生转换。
signal processing program,filter,tansfer signal from time to frequency. (2010-11-15, Visual C++, 2KB, 下载4次)
1．掌握A/D 转换的基本过程和程序处理过程；
2．学习通过对采样值进行计算产生混频波形。
3．熟悉FIR 滤波器及其参数的调整。
1. Master A/D conversion process of the basic processes and procedures 2. Learning through the computed values of the sampled wave mixing. 3. Familiar with the adjustment of FIR filter and its parameters. (2010-09-13, C/C++, 3172KB, 下载8次)
dsp电机程序，如何人产生pwm波形，适合与初学者。
dsp motor program, how people generate pwm waveform, suited for beginners. (2010-01-11, WORD, 405KB, 下载10次)
C环境下的DSP中正弦波发生器功能的实现，程序运行稳定正常，无出错（实验测试程序）。
C environment in the sine wave generator of the DSP function of the realization of stability in the normal program to run without errors (experimental test procedures). (2009-05-10, C/C++, 4KB, 下载2次)
利用达盛DSP试验箱设计键盘输入发生装置，要求：
1、 用键盘输入分频置，控制蜂鸣器发声。
2、 采用将DSP通用I/O引脚直接驱动的方式。
3、 用发光数码管显示分频值。
Tatsu Sheng chamber using DSP design keyboard input device, requirements: one, using keyboard input frequency Purchase, control audible buzzer. 2, using the DSP Universal I/O pins directly drive way. 3, using LED digital tube display frequency values. (2009-03-02, Asm, 1KB, 下载12次)
pwm波形的产生
对dsp初学者有很大帮助
pwm waveform generated on the dsp has great help for beginners (2007-09-01, C/C++, 7KB, 下载4次)
dsp实验测试程序,包括指令实验、存储器、串口、同步串口、步进电机、硬件中断、定时器、交通灯、直流电机、滤波器、正弦波发生器、语音录放、EXAM_C、显示屏
dsp experiment testing procedures, including instructions experiment, memory, serial port, synchronous serial port, stepping motor, hardware interrupt, Timer, traffic lights, Motor, filter, sine wave generator, Voice Recording and Playback, EXAM_C, Display (2007-04-16, C/C++, 67KB, 下载195次)