实现了使用28335进行CAP采集和PWM波形生成
The use of 28335 for CAP acquisition and PWM waveform generation. (2018-11-19, C/C++, 1080KB, 下载2次)
DSP28335 利用输入捕获功能产生PWM 波形，测试通过可用
The DSP28335 uses the input capture function to generate PWM waveforms that are tested by the available (2017-08-21, WINDOWS, 2KB, 下载3次)
dsp的sin函数波形的产生，能产生任意的正弦函数
DSP sine function waveform, can produce any sine function (2016-08-08, Visual C++, 145KB, 下载6次)
dsp2808带死区的PWM发生程序，主频率100MHZ，一路PWM波
dsp2808 PWM program with a deadband , the main frequency 100MHZ, only one PWM wave (2015-01-04, C/C++, 341KB, 下载2次)
通过DSP编程，实现卷积算法，已通过运行，能出现最后的波形
By DSP programming, to achieve convolution algorithm has been run through, the last wave to appear (2014-05-14, Others, 11KB, 下载4次)
本课程设计的主要目的是在MATLAB环境下，使用窗口设计法设计一个滤波器，并对语音信号进行滤波去噪。开发平台为MATLAB7.0，设计方法为窗口设计法。用麦克风采集一段语音信号，绘制波形并观察其频谱，给定相应技术指标，用凯塞窗设计一个满足指标的FIR滤波器，对该语音信号进行滤波去噪处理，比较滤波前后的波形和频谱并进行分析。在滤波前后语音信号波形的变化中，由于我们录制的语音信号噪声不大，所以观察并不明显，但在频域波形中，我们可以明显的看到设计的滤波器对语音信号进行了滤波处理，将噪声进行了滤除。此次滤波基本达到了要求，完成了设计指标。
The main purpose of this course is designed in the MATLAB environment, the use of window design method to design a filter, and the voice signal filtering noise. Development platform for MATLAB7.0, design methods for the window design method. Collecting a voice signal with a microphone, and observe its spectrum waveform drawing, given the corresponding technical indicators, using a Kaiser window design FIR filter meet the target, the filter denoising speech signal processing, a waveform and spectrum before and after filtering and analyzed. Before and after the filter in the speech signal waveform changes, because we recorded voice signal to noise is low, they observed not obvious, but the waveform in the frequency domain, we can clearly see the design of a filter for the filtering of the speech signal processing , the noise were filtered out. The filtering basically reached the requirements to complete the design specifications. (2013-10-31, Others, 115KB, 下载7次)
TMS320F2812 AD模块，恒压频比控制，SPWM波形
The TMS320F2812 AD module, constant voltage-frequency ratio control, SPWM waveform (2013-01-20, Others, 308KB, 下载23次)
采用matlab实现的三角波发生程序，对于做pwm整流逆变的同学非常有用
sanjiaobo programe implement in matlab (2012-10-15, matlab, 7KB, 下载27次)
mcbsp实例，在多帧模式下，使用采样率发生器同步帧，将McBSP配置为数字环回模式与32位数据传输格式
mcbsp instance, in the multi-frame mode, the sample rate generator synchronization frame, the McBSP configured as a digital loopback mode (2012-06-25, C/C++, 128KB, 下载11次)
开环反转占空比控制程序,用来产生开环PWM波形
Open-loop reverse duty cycle control procedures used to generate the PWM waveform of the open-loop (2012-06-11, Visual C++, 100KB, 下载3次)
F2812产生SPWM波。（CCS3.3开发环境下）EVA下的通用定时器T1工作于连续增/减计数模式，产生三角载波，载波频率为3000Hz，载波比N=60，因此调制波形正弦波的频率为50Hz。本实验中，调制度为0.8。
F2812 generating SPWM wave. EVA work under the general-purpose timer T1 in a row up/down counting mode, resulting in triangular carrier, the carrier frequency of 3000Hz, the carrier than the N = 60, so the sine wave frequency modulation waveform is 50Hz. In this study, the modulation of 0.8. (2011-12-18, C/C++, 215KB, 下载14次)
fft信号发生，产生连续的余弦信号，分别用C语言编写
fft signal, resulting in continuous cosine signals, respectively, with C language (2011-03-16, C/C++, 1KB, 下载4次)
2812产生PWM波形的全部文件，稍做修改可以直接使用
2812 PWM waveform produced all the documents with minor modification can be used directly (2010-08-13, C/C++, 7175KB, 下载69次)
最好的灵活应用CCS对2812中pwm波形的产生示例
Flexible application of the best in the CCS on the 2812 pwm waveform generation examples (2010-07-30, Others, 154KB, 下载19次)
基于DSPIC的变频电机驱动的SPWM波形产生电路
Based DSPIC SPWM frequency conversion motor drive waveform generation circuit (2010-05-14, C/C++, 10KB, 下载16次)
应用具体的DSP架构，在CCS中实现正弦波发生器，能给初学者带来很大的帮助。
Application specific DSP architecture is implemented in the CCS sine wave generator, can give great help for beginners. (2009-09-22, C++, 4KB, 下载9次)
PWM波形产生举例，TMS320快速傅里叶变换，串行外设接口应用举例
PWM waveform generator, for example, TMS320 Fast Fourier Transform, serial peripheral interface applications, for example (2009-01-08, Others, 149KB, 下载22次)
通过Ｆ２８１２产生ＰＷＭ波形来控制电机的运转．
F2812 generated through the PWM waveform to control the motor running. (2008-11-13, C/C++, 4750KB, 下载50次)
经典的DSP试验程序集合！
01指令实验
02存储器
03串行口
04同步串口
05步进电机
06硬件中断
07定时器
08交通灯
09直流电机
10滤波器
11正弦波发生器
12语音录放
13显示屏
DSP testing procedures classic collection! 01 Directive 03 Experiment 02 ROM 04 synchronous serial port serial port 05 stepper motor 06 hardware interrupt 07 timer 08 traffic lights 09 DC 10 filter 11 sine wave generator 13, display 12, voice recording (2008-01-07, C/C++, 63KB, 下载103次)
有14个DSP的实验测试程序，可以与大家分享。类型分别为：滤波器，正弦波发生器，步进电机，直流电机，交通灯，语音录放，指令实验，存储器，串行口，定时器，显示屏，硬件中断，同步串口，exam-c
14 DSP experimental test procedure can share with you. Type of : filter, sine wave generator, stepper motors, DC motors, traffic signals, voice recording, direct experiments, memory, serial port, timers, screens, hardware interrupt, synchronous serial ports, exam-c (2006-05-12, C/C++, 76KB, 下载71次)