DSP编程，功能位实现一个实时的时钟发生器，开发软件为德州仪器的CCS
CCS DSP programming, functional position to implement a real-time clock generator, to develop software for the Texas Instruments (2015-11-28, Visual C++, 571KB, 下载3次)
使DSP的GPIO口输出可调的正弦脉宽调制波形
Sinusoidal pulse width modulation (2015-08-02, Visual C++, 142KB, 下载5次)
基于dsp2812的pwm发生程序，检验可靠
the program is based on the occurrence of dsp2812 pwm, reliable inspection (2015-07-25, Visual C++, 250KB, 下载3次)
DSP2812 发出固定占空比的PWM波形
DSP2812 Issued a fixed duty cycle of the PWM waveform (2014-10-22, Visual C++, 276KB, 下载3次)
基于ADSP-21065 的信号发生器源代码，非常难得的ADI SHARC DSP算法源代码
Signal Generator source code Base ADI ADSP-21065 , writed C language. (2014-07-15, Visual C++, 240KB, 下载4次)
// 该程序用于测试DSP的CAPTURE模块，由TIMER1的比较模块输出一个PWM 波形，此波形输入CAP4引脚，待CAP4捕捉该PWM的10次上升沿后，停止捕捉，并把10次捕捉值存于数组result[10]中
This program is used to test DSP CAPTURE. (2014-07-03, Visual C++, 6KB, 下载4次)
包括:DSP定时器使用,DSP_DMA的使用,DSP_MCBSP的使用,GMSK基带波形产生,学校学分绩的计算
include : the use of DSP timer, DSP_DMA use DSP_MCBSP use, GMSK baseband waveform generator, the school credits the calculation results (2014-05-07, Visual C++, 8KB, 下载4次)
包括:DSP定时器使用,DSP_DMA的使用,DSP_MCBSP的使用,GMSK基带波形产生,学校学分绩的计算
include : the use of DSP timer, DSP_DMA use DSP_MCBSP use, GMSK baseband waveform generator, the school credits the calculation results (2014-02-28, Visual C++, 8KB, 下载1次)
产生PWM逆变波形,直流48v转换到交流18v
produce pwm (2013-07-22, Visual C++, 831KB, 下载5次)
EVA下面的T1PWM、T2PWM、PWM1-6均输出频率为1KHz，占空比为40 的PWM波形。
T1PWM、T2PWM、PWM1-6输出的是不对称的PWM波形.EVB下面的T3PWM、T4PWM、
PWM7-12均输出频率为1KHz，占空比为40 的PWM波形。T3PWM、T4PWM、PWM7-12
输出的是对称的PWM波形.
EVA following T1PWM, T2PWM, PWM1-6 are output frequency is 1KHz, 40 duty cycle of the PWM waveform.* T1PWM, T2PWM, PWM1-6 of the PWM output waveform is asymmetric. EVB following T3PWM, T4PWM,* PWM7-12 are the output frequency is 1KHz, 40 duty cycle of the PWM waveform. T3PWM, T4PWM, PWM7-12* The output is symmetrical PWM waveform. (2013-07-18, Visual C++, 277KB, 下载2次)
dsp2812产生pwm波形程序，控制步进电机正反转与调速
dsp2812 generates pwm waveform control stepper motor with speed control (2013-04-15, Visual C++, 266KB, 下载10次)
DSP实验的第十一次，关于信号发生器，其中载频信号的选择很重要，阶数也很重要
DSP experiments eleventh signal generator, in which the choice of the carrier frequency signal is very important, the order is very important (2012-12-24, Visual C++, 156KB, 下载4次)
Based ON MS speach API，实时显示出来波形，FFT变换，，IFFT变换波形，支持从文件播放，基音分析，滤波，支持远程控制。欢迎大家改进！
Based ON MS speach API, real-time display of waveform, FFT, IFFT transform the waveform to support playback from a file, the pitch analysis, filtering, support for remote control. Welcome improvements! (2012-07-27, Visual C++, 106KB, 下载11次)
利用DSP28系列的芯片，进行SPWM波形的输出，试验分析可行
Output of SPWM (2012-07-16, Visual C++, 1KB, 下载3次)
基于C5402的CCS仿真低通滤波器程序，包含IIR和FIR两种滤波器，有仿真波形。
Based on the C5402 CCS simulation low-pass filter program, including IIR and FIR two filter, a simulation waveform. (2012-05-11, Visual C++, 111KB, 下载42次)
VC通过串口控制DSP的上位机界面并画出数据波形图
VC DSP-PC interface through the serial port control and draw the data waveform (2012-03-28, Visual C++, 3640KB, 下载106次)
dsp2407 输出spwm波形，控制单相逆变用
dsp2407 spwm (2011-03-06, Visual C++, 70KB, 下载61次)
编写利用FFT实现脉压的ADSP测试程序，DSP平台为TigerSHARC处理器，编程语言不限，完成脉压计算。波形数据的采样频率为20MHz,信号的调频带宽1~10MHz可以选择，脉冲宽度20~200us可以选择。将MATLAB中产生的零中频线性调频信号的波形数据，导入VDSP++中，利用软件的仿真功能，运行程序，并且观察结果。统计计算脉压前后脉冲宽度的变化，脉压的增益。比较不同窗函数对脉压输出脉冲幅度和宽度的影响。统计不同条件下的运行周期数。
failed to translate (2011-01-12, Visual C++, 1873KB, 下载62次)
dsp280x实现输出四路PWM波形，可以改变波形的周期和占空比，输出波形的相位也不同，在示波器上能看到波形，代码全部调试合格，ccs3.1下编译通过
This program requires the DSP280x header files.
//
// Initially tie TZ1 (GPIO12) and TZ2 (GPIO13) high.
//
// During the test, monitor ePWM1 or ePWM2 outputs
// on a scope Pull TZ1 or TZ2 low to see the effect.
//
// EPWM1A is on GPIO0
// EPWM1B is on GPIO1
// EPWM2A is on GPIO2
// EPWM2B is on GPIO3
//
// ePWM1 will react as a 1 shot trip
//
// ePWM2 will react as a cycle by cycle trip and will be
// cleared if TZ1 and TZ2 are both pulled back high.
//
//
// As supplied, this project is configured for "boot to SARAM"
// operation. The 280x Boot Mode table is shown below.
// For information on configuring the boot mode of an LSD_EVM320F2801X,
// please refer to the documentation included with the LSD_EVM320F2801X, (2010-07-29, Visual C++, 173KB, 下载54次)
DSP2812方波发生程序，适合初学者，大家看看
DSP2812 square wave occurred procedure, suitable for beginners, we look at (2010-03-19, Visual C++, 7KB, 下载27次)