磁悬浮二维轴承仿真，记录轴承在x以及y方向的偏移量，转子受力的变化状况。
The simulation of the two-dimensional magnetic bearing records the deviation of the bearing in X and Y directions and the change of the rotor force. (2020-06-01, ansys, 73KB, 下载5次)
现对某土质边坡进行稳定性分析，并采用地下连续墙进行加固。已知土的重度γ=20kN/m3，黏聚力c=42kPa，内摩擦角?=17°，弹性模量E=100MPa，泊松比υ=0.3。混凝土的弹性模量为33Gpa，泊松比υ=0.2。尺寸及载荷如图所示。
分布载荷：q=2000N/m
尺寸大小:a=30+学号尾数（末三位）×0.01（m）；
地下连续墙厚度50cm，总高15m，中心距离坡脚3m。
问：采用地下连续墙进行加固，绘制有墙边坡的滑移带，并给出安全系数（保留小数点后两位）
In this paper, the stability of a soil slope is analyzed, and the diaphragm wall is used to reinforce it. The known soil's weight is gamma=20 kN/m3, cohesion c=42 kPa, internal friction angle_=17 degrees, elastic modulus E=100 MPa, Poisson's ratio_=0.3. The elastic modulus of concrete is 333pa, and Poisson's ratio_=0.2. Dimensions and loads are shown in the figure.
Distributed load: q = 2000N/m
Size: a = 30 + number (last three) * 0.01 (m);
The diaphragm wall is 50 cm thick, 15 m high and 3 m away from the foot of the slope.
Question: The diaphragm wall is used to reinforce the slope, the slip zone of the slope with wall is drawn, and the safety factor is given (two decimal points are reserved). (2019-04-22, ansys, 18KB, 下载9次)
基于三通带交叉耦合带通滤波器的设计，中心频率在2.4Ghz和3.4Ghz及5.5Ghz
Design of cross coupling bandpass filter based on three passband (2018-01-03, ansys, 88KB, 下载3次)