71M6453程序代码 ，是3相智能电表源程序，有CE核，程序，有校表程序。稍微修改，可以变成一点校正
71M6453 program code, the source code is a three-phase smart meters, have CE core, procedures, calibration procedures. Slightly modified, can be turned into a one correction (2014-11-03, C/C++, 6894KB, 下载33次)
智能电表校表软件，适用于多个厂家的台体，09标准表，可以修改适用于13标准
8209 MCU (2014-11-03, C#, 4802KB, 下载139次)
多功能数字钟，具有调时校时，整点报时，闹铃及其设定等功能，可直接下载到DE0开发板上
verilog clock (2014-10-29, VHDL, 177KB, 下载3次)
AD9854 核心板和模块板的总程序 无忧电子
AD9854 final test (2014-10-27, C/C++, 187KB, 下载12次)
可以自动计时与校时的电波钟程序，内含解码程序
Timing and clock radio automatically when the school program, containing decoding program (2014-10-21, VHDL, 723KB, 下载15次)
这个是PCF8563，IIC接口的实时时钟芯片。代码经过本人测试，可以正常使用
This is PCF8563, IIC interface real-time clock chip. Code after I test, can normal use
(2014-09-01, C/C++, 48KB, 下载1次)
STC12C5A60S2+2.4TFT+DS1302+DS18B20+GPS+FM 自动校时收音机电子钟 STC12C5A60S2+2.4TFT+DS1302+DS18B20+GPS+FM 自动校时收音机电子钟
捣鼓了许久,将之前的电子钟做了些改动,顺便试了下GPS跟FM,做了这个版本的 51+2.4寸TFT+GPS+FM电子钟
STC12C5A60S2+ 2.4TFT+ DS1302+ DS18B20+ GPS+ FM automatic correction when electronic clock radio
Fiddle for a long time, the electronic clock before made some changes to the way the next test GPS with FM, made this version of the 51+ 2.4 inch TFT+ GPS+ FM digital clock (2014-08-24, Objective-C, 14117KB, 下载15次)
ATT7022B c程序代码，mcu采用的是51单片机，程序中包含有SPI 通信及校表代码
ATT7022B c source code, the mcu type is 51 controller, the code contain spi communication and meter calibration. (2014-07-14, C/C++, 5KB, 下载5次)
功能需求：
日期、时间、星期、按键校时、闹钟、温度测量、红外遥控校时。
人性化设计需求：
时间显示： 数码管(醒目)
星期显示：点阵(醒目+显示有限)
装饰： 来回流水灯
日期、温度和闹钟等辅助信息显示：液晶
近距离校时：按键
远距离遥控校时：红外遥控器
Functional requirements:
Date, time, week, when the school keys, alarm clock, temperature measurement, infrared remote control at school.
Humanized design requirements:
Time Display: Digital tube (striking)
Weekday: dot matrix (striking+ show limited)
Decorations: light water back and forth
Date, temperature and alarm clock, and other auxiliary information display: LCD
When you close the school: Key
When long-distance remote school: infrared remote control
(2014-07-02, Visual C++, 3KB, 下载2次)
数字时钟 LCD1602显示 可以校时。
编译环境QUARTUS II 7.2
Digital clock LCD1602 display can be corrected.
Compilation environment QUARTUS II 7.2
(2014-06-27, VHDL, 2107KB, 下载1次)
数字式电子钟实际上是一个对标准1Hz进行计数的计数电路，秒计数器满60后向分计数器进位, 分计数器满60后向时计数器进位, 时计数器按24翻1规律计数, 计数输出经译码器送LED显示器, 由于计数的起始时间不可能与标准时间（如北京时间）一致，故需要在电路上加上一个校时电路，该数字式电子钟除用于计时外，还能整点报时，如图所示为多功能数字式电子钟的构成框图。除校时功能外，电子钟处于其他功能状态时并不影响数字钟的运行，该电子钟利用GW48 实验平台的扬声器进行整点报时，设置2个按键作为功能键和调整键。
Digital electronic clock is actually a standard 1 hz for of counting circuit, a second counter after full 60 to carry and runs counter to the full 60 later carry, when counter count by 24 turn 1 pattern, counting output by the decoder to send the LED display, because of the starting time of count can t consistent with the standard time (Beijing time), so it need to be in electric circuit when adding a school on the road, the digital electronic clock except for timing can hour, as shown in the structure diagram of the multi-function digital electronic clock. In addition to the school when the function, the electronic clock is in a state of other function does not affect the operation of the digital clock, the electronic clock USES GW48 experiment platform of the speaker for a hour, set up two keys as function keys and adjust key.
(2014-05-25, Java, 187KB, 下载3次)
基于c8051f020的寻迹智能小车的程序 校赛使用过
Based on c8051f020 intelligent tracing car used the program of the competition
(2014-05-18, C/C++, 3KB, 下载2次)
涵普校表台国网校表软件
适用于涵普单相、三相校表台，电表通信规约和校表流程可按需求修改。
Han Wang Xiao Pu calibration station States Han Pu table software for single-phase, three-phase calibration equipment, meter calibration process communication protocol and can demand changes. (2014-05-05, C#, 1917KB, 下载51次)
此源代码采用STM8S105S4T6为核心芯片，开发环境为STVD，采用C语言模块化编程。
①自动计时功能，采用LCD12864显示年、月、日、星期、时、分、秒、温度等信息.
②有校时功能，能对时间进行校准。
③具有定时闹钟功能，能设定定时闹钟，在时间到时能使蜂鸣器鸣叫。
④用4个普通机械按键和4个红外遥控按键实现校时和闹铃时间设置双用功能。
⑤普通机械按键在校时的时候实现一个按键能够实现按一下后加1和按一下后按照设定时间连续加1两种功能。
⑥设置功能采用LCD12864多菜单显示功能。
⑦在闹铃时间到时蜂鸣器鸣叫，鸣叫的时间超出20秒左右后闹铃会自动关闭（期间没有按键按下），若在蜂鸣器鸣叫期间有按键按下，则闹铃也会关闭。
This source code using STM8S105S4T6 core chip development environment for STVD, modular programming using C language.
① automatic timing function, using LCD12864 display year, month, date, day, hour, minute, second, temperature and other information.
② The school functions can be calibrated on time.
③ with a regular alarm clock function, can set the regular alarm clock, to make the buzzer sounds when the time.
And dual-use feature set alarm time when ④ with four mechanical buttons and four ordinary infrared remote control buttons to achieve the school.
⑤ ordinary mechanical buttons at the school when the time to achieve the realization of a button click and click after adding a post in accordance with the set time plus a consecutive two functions.
⑥ setting function menu display using multi LCD12864.
⑦ when the buzzer sounds at the alarm time, tweet longer than about 20 seconds after the alarm turns off automatically (no keys pressed during), if during the buzzer button (2014-04-21, Others, 282KB, 下载70次)
设计一个具有时、分、秒显示的电子钟（23小时59分59秒）。该电子钟应具有手动校时、校分得功能。
Designing a hours, minutes and seconds display electronic clock (23 hours 59 minutes 59 seconds). When the electronic clock should have manually school, school share function. (2014-04-02, Visual C++, 502KB, 下载2次)
这个源码是利用STM32操作ATT7022E，并简单的读取各项基本参数的通讯例子。STM32使用R8T6，计量芯片是ATT7022E。例程中采用模拟SPI来对ATT7022E进行操作，里面的初始化、校表的寄存器操作均是根据ATT7022E的用户手册和应用笔记的最新寄存器操作进行。希望这个例子能对使用这款芯片做电力仪表的带来帮助。
This source is the use STM32 operating ATT7022E, and a simple example of the basic reading communication parameters. STM32 using R8T6, metering chip is ATT7022E. Analog SPI routines to manipulate ATT7022E, register operations inside the initialization, school tables are made in accordance ATT7022E user manuals and application notes for the latest register. I hope this example will bring help to use the chip to make electricity meters. (2014-03-30, C/C++, 196KB, 下载619次)
1．具有‘时’、‘分’、‘秒’、‘毫秒’的数码管十进制数字显示。
2. 具有手动校时、校分的功能。
3．具有定时与闹钟功能，能在设定的时间使LED灯亮光。
4．能进行整点报时。即从59分50秒起，每隔2秒钟绿色LED灯点亮一次，连续5次，最后一次红色LED灯点亮一次，表明到达整点。
5、具有秒表功能，能显示1 秒，手动停止。
6、具有倒计时功能，显示小时、分钟、秒。
1. With ' when' , ' points' , ' second' , ' ms' digital tube display decimal digits. (2) When a manual school, school of function. 3. With a timer and alarm clock function, can make the LED lights light at a set time. 4. Can carry the whole point timekeeping. Namely, from 59 minutes and 50 seconds, every 2 seconds the green LED lights up once, five consecutive times, the last time the red LED lights up, indicating that reaches the whole point. 5, with a stopwatch function that can display one percent second manually stopped. 6, with a countdown function, display of hours, minutes, seconds. (2014-03-10, VHDL, 2KB, 下载2次)
可以每天自动领取51cto下载豆、无忧币。赶紧下载试试吧！！
Can automatically receive 51cto downloads beans, worry-free coins every day. Quickly download and try! ! (2014-02-19, Unix_Linux, 1KB, 下载7次)
这是我做校赛时写的循迹车程序,它有16个光电传感器ST188,利用舵机转向,基于STC12C5A60S2单片机,开发环境为keil
This is what I do when writing school race car tracking program, which has 16 photoelectric sensors ST188, the use of servo steering, STC12C5A60S2 microcontroller-based development environment for keil (2014-02-08, Others, 60KB, 下载3次)
DLP LightCrafter4500
数字微镜(DMD)空间光开关光调制器开发系统
1. 全面兼容德州仪器TI DLP LightCrafter4500开发系统. 能够支持1280X800 DMD(DMD微镜为7.56微米,本征分辨率为912X1140)
2. 支持HDMI高速度传输图片和USB控制信号,支持128Mbit USB图片预存储(64张预装图片存储) 高达4255Hz直接DMD装载显示
3. 开放式控制软件基于Windows XP/Vista USB驱动可控制系统,在Qt, Visual C++下编制,开发式接口, 易于高精度光学科研实验
4. 同时支持2路输入触发/同步和2路输出触发/同步 提供1.8V, 2.5V, 3.3V, 5V同步转换支持Camera同步
5. 系统提供纯LED照明系统, R,G,B任意色彩可调整 亮度高达300流明(实测值)
6. 高速二进和256灰阶图片显示 输入输出系统触发,支持通用客户顶GPIO口设置
7. 我们能为客户提供全程独特定做和设计服务.
典型应用:
结构光投影,激光全息,无掩模光刻,高光谱成像,激光光束校形, 3D测量和3D打印机技术, 光谱分析.
Jefferson_zhao@163.com
DLP LightCrafter4500 (2014-01-20, Visual Basic, 1986KB, 下载25次)